BP SOLAR PANEL - 175 Watt BP4175J BP 4175 J
Quality BP High-efficiency photovoltaic module using MonoCrystaline Cells
BP 4175
Rated power: 175WTypical applications: Designed for grid-connected applications, such as large commercial roofs, residential systems and photovoltaic (PV) power plants, as well as remote off-grid applications such as telecommunications, water pumping and residential systems.
Configuration: BP 4175N ñ Universal frame, a sealed junction box with output cables and polarised Multicontact (MC III) connectors.
BP 4175J ñ Universal frame with an accessible junction box for cable connection.
Nominal voltage: 24V
Cell technology: Monocrystalline
Dimensions:1593 x 790 x 50mm
Weight: 15.4kg
Glass type: 3.2mm tempered anti-reflective coated glass.
Frame type: Silver anodised aluminium.
Quality from a manufacturer you trust. Great for Boats, Caravans, Camper Trailers, 4wd and more!
Comes with easy to use Junction Box for easy instalation. Freight cost is approximate and may be more or less - insurance is recommended. Paypal is not accepted for this item. For orders of 10+ units please contact us for a further discount!
The BP 4175 is an advanced monocrystalline 175W solar module that
incorporates anti-reflective coated cells and glass to generate more energy
(more kWh per kWp) in your installation. This module has undergone the most
rigorous testing to ensure reliable long term performance and is certified to
comply with the latest safety standards (IEC 61730 & UL 1703). Three bypass
diodes mounted on our IntegraBusô circuit board and laminated in the module
provide effective protection of the solar cells from overheadting when shaded
and ensure long term reliability. All interconnections are made using lead free
soldering making these modules even friendlier with the environment.
Performance
Rated power 175W
Tolerance -3/+5%
Nominal voltage 24V
Warranty* 90% power output over 12 years
80% power output over 25 years
Free from defects in materials and workmanship for 5 years
*Refer to BP Solar's Warranty document for terms and conditions
Configuration
BP 4175N Universal frame, a sealed junction box with output cables and
polarised Multicontact (MC III) connectors.
BP 4175J Universal frame with an accessible junction box for
cable connection.
Qualification test parameters
Temperature cycling range -40∞C to +85∞C for 200 cycles
Damp heat test 85∞C and 85% relative humidity for 1000h
Front & rear static load test (eg: wind)
2400Pa (equivalent to 245kg/m2 load
distributed)
Front load test (eg: snow and wind)
5400Pa* (equivalent to 550kg/m2 load
distributed)
Hailstone impact test 25mm hail at 23m/s from 1m distance
Impulse voltage test
8000 V waveform impulse according to
high voltage test techniques IEC 60060-1
standard
Reverse current overload test 135% of the overcurrent protection rating
for two hours
*When mounted in accordance with BP Solar's installation instructions.
Quality and safety
ï Conforms to European directives.
ï Certified according to the extended version of the IEC 61215:2005 (Crystalline silicon
terrestrial photovoltaic modules - Design qualification and type approval).
ï Certified according to IEC 61730-1 and IEC 61730-2. (Photovoltaic modules safety
qualification, requirements for construction and testing).
ï Listed by Underwriterís Laboratories for electrical and fire safety (UL 1703 - Class C
fire rating).
ï Module electrical measurements are calibrated to World radiometric reference via third
party international laboratories.
ï Manufactured in ISO 9001 and ISO 14001 certified factories.
ï This data sheet complies with the requirements of EN 50380.
BP 4175
BP 4175 I-V Curves
Electrical characteristics 1000W/m≤ (STCπ) 800W/m≤ (NOCT≤)
Maximum Power (Pmax) 175W 126W
Voltage at Pmax (Vmp) 35.4V 31.5V
Current at Pmax (Imp) 4.94A 3.9A
Short circuit current (Isc) 5.54A 4.4A
Open circuit voltage (Voc) 43.6V 39.7V
Efficiency reduction at 200W/m2 <3% reduction (efficiency 13.5%)
Limiting reverse current 5.45A
Temperature coefficient of Isc (0.065±0.015)%/∞C
Temperature coefficient of Voc -(0.36±0.05)%/∞C
Temperature coefficient of P -(0.5±0.05)%/∞C
NOCT3 47±2∫C
Maximum series fuse rating 15A
Application class (According to IEC 61730:2007) Class A (1000V)
1
Standard test conditions (STC), irradiance of 1000W/m2 at an AM1.5G solar spectrum and a cell temperature of 25∞C.
2
800W/m2, NOCT, AM 1.5G solar spectrum.
3
NOCT. Nominal Operating Cell Temperature sun 800W/m2, air 20oC, winds speed 1m/s.
Mechanical characteristics
Solar cells
72 monocrystalline (125mm x 125mm) connected in series.
Front cover High transmission 3.2mm tempered anti-reflective coated glass.
Encapsulant EVA
Back cover White polyester
Frame Silver anodised aluminium
Diodes
IntegraBusô technology includes three Schottky bypass diodes -
one for every 24 cells - on a printed circuit board.
Junction box
Dimensions (mm) 39.60 x 100.60 x 13.2 Potted (IP67); cerified to
meet UL1703 flammability test.
Output cables
3.3mm2 cable with weatherproof multi-contact III connectors.
Asymmetrical cable lengths 1250mm (-) and 800mm (+).
Dimensions (mm) 1593±3 x 790±3 x 50
Weight (kg) 15.4
