BP SOLAR PANEL - 30 Watt BPSX30 BP SX330
Quality BP High-efficiency photovoltaic module using silicon nitride multicrystalline silicon cells.
Quality from a manufacturer you trust. Great for Boats, Caravans, Camper Trailers, 4wd and more!
Comes with easy to use Junction Box for easy instalation. Freight cost is approximate and may be more or less - insurance is recommended. Paypal is not accepted for this item.Contact Us for further discount on 10 or more units purchased together.
BP SX 30
Rated power: 30W
Typical applications: With 36 multicrystalline cells in series, this module charges batteries efficiently in virtually any climate. Commercial applications of the BP SX 30 include remote telemetry, instrumentation, sensors, signals, and land-based navigation aids.
Configuration: SX 30J - Clear universal frame and standard J-Box
Nominal voltage: 12V
Cell technology: Multicrystalline
Dimensions: 595 x 502 x 50mm
Weight: 3.9kg
Glass type: High transmission 3mm tempered glass.
Frame type: Clear anodised aluminium alloy type 6063T6 universal frame. Colour: silver.
High-efficiency photovoltaic module using silicon nitride multicrystalline silicon cells.
Performance
Rated power (Pmax) 30W
Power tolerance ± 10%
Nominal voltage 12V
Limited Warranty1 12 years
Configuration
J Clear universal frame and standard J-Box
Electrical Characteristics2 SX330
Maximum power (Pmax)3 30W
Voltage at Pmax (Vmp) 16.8V
Current at Pmax (Imp) 1.78A
Warranted minimum Pmax 27W
Short-circuit current (Isc) 1.94A
Open-circuit voltage (Voc) 21.0V
Temperature coefficient of Isc (0.065±0.015)%/ ∞C
Temperature coefficient of Voc -(80±10)mV/∞C
Temperature coefficient of power -(0.5±0.05)%/ ∞C
NOCT (Air 20∞C; Sun 0.8kW/m2 ; wind 1m/s) 47±2∞C
Maximum series fuse rating 5A
Maximum system voltage 50V (US NEC rating)
50V (IEC 61215 rating)
Mechanical Characteristics
Dimensions Length: 595mm (23.4î) Width: 502mm (19.7î) Depth: 50mm (1.97î)
Weight 3.9 kg (8.6 pounds)
Solar Cells 36 cells (57mm x 114mm) in a 4x9 matrix connected in series
Junction Box J-Version junction box with 4-terminal connection block; IP 65, accepts PG 13.5,
M20, Ω inch conduit, or cable fittings accepting 6-12mm diameter cable.
Terminals accept 2.5 to 10mm2 (8 to 14 AWG) wire.
Construction Front: High-transmission 3mm (1/8th inch) tempered glass; Back: Polyester; Encapsulant: EVA
Frame Clear anodized aluminum alloy type 6063T6 Universal frame; Color: silver
1. Module Warranty: 12-year limited warranty of 90% power output; 2-year limited warranty of materials and workmanship.
See your local representative for full terms of these warranties.
2. These data represent the performance of typical BP modules, and are based on measurements made in accordance with ASTM E1036
corrected to SRC (STC.)
3. During the stabilization process that occurs during the first few months of deployment, module power may decrease by approx. 1% from
typical Pmax.
Quality and Safety
Manufactured in ISO 9001-certified factories; conforms to European Community
Directives; certified to IEC 61215
Module power measurements calibrated to World Radiometric Reference through
ESTI (European Solar Test Installation at Ispra, Italy)
Listed by Underwriterís Laboratories for electrical and fire safety
(Class C fire rating)
Approved by Factory Mutual Research in NEC Class 1, Division 2,
Groups C & D hazardous locations.
Qualification Test Parameters
Temperature cycling range -40∞C to +85∞C (-40∞F to 185∞F)
Humidity freeze, damp heat 85% RH
Static load front and back (e.g. wind) 2,400 pa (50psf)
Front loading (e.g. snow) 5,400 pa (113psf)
Hailstone impact 25mm ÿ (1 inch) at 23 m/s (52mph)
