BP SOLAR PANEL - 50 Watt BP350J BP 350 J
Quality BP High-efficiency photovoltaic module using silicon nitride multicrystalline silicon cells.
Quality from a manufacturer you trust. Great for Boats, Caravans, Camper Trailers, 4wd and more!
Comes with easy to use Junction Box for easy instalation. Freight cost is approximate and may be more or less - insurance is recommended. Paypal is not accepted for this item.Contact Us for further discount on 10 or more units purchased together.
BP 350
Rated power: 50WTypical applications: Advanced polycrystalline cells with SiN coating and a 12V nominal output make the BP 350 ideal for remote telemetry, instrumentation systems, security sensors, and land-based aids to navigation. The BP 350 is also well suited to providing subsistence power to remote homes that do not have access to the utility grid.
Configuration: Clear universal frame with an accessible junction box for cable connection
Nominal voltage: 12V
Cell technology: Polycrystalline
Dimensions: 839 x 537 x 50mm
Weight: 6.0kg
Glass type: High transmission 3mm tempered glass.
Frame type: Clear anodised aluminium alloy type 6063T6 universal frame.
Colour: silver.
The BP 350J is an advanced 50W photovoltaic module that addresses the
needs of rural electrifi cation, for remote homes that do not have access
to the utility grid, to remote industrial applications such as telemetry and
instrumentation systems. This product offers improved effi ciency through the
use of advanced polycrystalline cells with SiN coating and a 12V nominal output,
making it ideal for battery charging applications. It has proven performance at
high temperatures and its robust design makes the product durable in the fi eld
and easy to install.
Performance
Rated power 50W
Module effi ciency 11.1%
Nominal voltage 12V
Warranty 90% of minimum warranted power output over 12 years
80% of minimum warranted power output over 25 years Free
from defects in materials and workmanship for 5 years
Configuration
BP 350J Universal frame with an accessible junction box for
cable connection
Qualification test parameters
Temperature cycling range -400C to +850C for 200 cycles
Damp heat test 850C and 85% relative humidity for 1000h
Front and rear static load test (eg: wind) 2400 Pa
Front load test (eg: snow) 5400 Pa
Hailstone impact test 25mm hail at 23m/s from 1m
Quality and safety
ï Manufactured in ISO 9001 and ISO 14003 certifi ed factories
ï Conforms to European Community Directive 89/33/EEC, 73/23/EEC, 93/68/EEC
ï Certifi ed to IEC 61215
Module power measurements calibrated to World Radiometric Reference through ESTI
(European Solar Test Installation at Ispra, Italy)
Framed modules listed by Underwriterís Laboratories for electrical and fi re safety
(Class C fi re rating)
Approved by Factory Mutual Research in NEC Class 1, Division 2, Groups C & D
hazardous locations
BP 350J
Typical electrical characteristics BP 350J
Maximum power (Pmax)1 50W
Warranted minimum power 45W
Voltage at Pmax (Vmp) 17.5V
Current at Pmax (Imp) 2.9A
Short circuit current (Isc) 3.17A
Open circuit voltage (Voc) 21.8V
Temperature coeffi cient of Isc
(0.065±0.015)%/oC
Temperature coeffi cient of Voc
-(80±10)mV/oC
Temperature coeffi cient of Pmax
-(0.5±0.05)%/oC
NOCT2 47±20C
Maximum series fuse rating 20A
Maximum system voltage 50V (IEC 61215 rating)
Mechanical characteristics
Dimensions (mm) 839 x 537 x 50
(Overall tolerances +/-3mm)
Weight (kg) 6.0
Frame Clear anodised aluminium alloy type 6063T6. Colour: silver.
Solar cells 72 cells (42mm x 125mm) confi gured geometrically for 2 parallel
strings of 36 for a 18 x 4 matrix.
Junction box IP65 junction box with 4 terminal screw protection connection block,
accepts PG 13.5, M20, 13mm conduit, or cable fi ttings accepting
6-12mm diameter cable. Terminals accept 2.5 to 10mm2(8 to 14 AWG) wire.
Diodes One 9A, 45V Schottky by-pass diode included.
Construction Front: High transmission 3mm tempered glass.
Rear: White polyester; encapsulant: EVA.
