-9 %
Workshop 6/12/24V 20A* 12,000mA Battery Charger Manual & Auto
With plenty of power, engine start facility and the ability to charge 6, 12 or 24V batteries,
it is perfectly suited to mechanical workshops and auto electricians and solar power backup (great to leave ugged into the generator!)
| FEATURES |
| Multi Voltage Operation Suitable for charging 6, 12 or 24 Volt batteries. |
| Manual Charge When used by experienced operators it can be used to deliver an equalization charge to balance the voltage in the battery's cell. |
| Automatic Charge Leave connected to the battery without the risk of overcharging. The charger automatically controls its output when the battery is full, and maintains it in a fully charged state. |
| 0-14 Hour Timer Automatically turns the battery charger off after set time. Can be set at 60 min intervals. |
| Engine Start If you need to get going and the battery is flat then the engine start will help you out. Connect the charger to the battery, set it to engine start mode for 5 minutes, then start your engine. |
| L.E.D Voltage/Amp Display A volt meter determines the battery charge level while the Amp meter displays how much power is being delivered into the battery. |
| Thermal Overload/Polarity Protection Prevents the output leads from sparking due to accidental reverse connection or short circuit, increasing safety. |
| * The term "20A" as opposed to "12,000mA" is an Amps RMS rating used as an industry reference and not the actual DC output. |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
020A 6v 12v 24v Projecta Automatic Battery Charger Start HDBC20
$431.82
$475.00
Ex Tax: $392.56
You Save: $43.19 or 9.09%
