BP SOLAR PANEL - 5 Watt BPSX305J BP SX 305 J
Quality BP High-efficiency photovoltaic module using silicon nitride multicrystalline silicon cells.
Quality from a manufacturer you trust. Great for Boats, Caravans, Camper Trailers, 4wd and more!
Comes with easy to use Junction Box for easy instalation. Freight cost is approximate and may be more or less - insurance is recommended. Paypal is not accepted for this item.Contact Us for further discount on 10 or more units purchased together.
SX 305
Rated power: 4.5W
Typical applications: These modules use standard polycrystalline cells and charge batteries in virtually any climate. This makes them ideal for commercial applications including remote telemetry, instrumentation, sensors, and signals.
Configuration: Multimount frame with lo-pro junction box and output cables
Nominal voltage: 12V
Cell technology: Polycrystalline
Dimensions: 251 x 269 x 23mm
Weight: 0.8kg
Glass type: High transmission 3mm tempered glass.
Frame type: Clear anodised aluminium alloy type 6063T6 multimount frame.
Colour: silver.
The SX 305 is a 5W module that uses standard polycrystalline cells and
charges batteries efficiently in any climate. It is the smallest BP Solar module
available and has been especially designed for use in off grid applications
such as telecommunications, telemetry, instrumentation systems and signals.
BP Solarís SX range of solar modules offer cost effective power for small or
moderate energy requirements, with a wide range of module power and size
options available for stand alone installations.
Performance
Rated power 4.5W
Nominal voltage 12V
Warranty 90% power output over 12 years.
Free from defects in materials and workmanship for 2 years.
Configuration
SX 305M Multimount frame with lo-pro junction box and output cables.
Qualification test parameters
Temperature cycling range -40∫C to +85∫C for 200 cycles
Damp heat test 85∫C and 85% relative humidity for 1000h
Front and rear static load test (eg: wind) 2400 Pa
Front load test (eg: snow) 5400 Pa
Hailstone impact test 25mm hail at 23m/s from 1m distance
Quality and safety
ï Manufactured in ISO 9001 and ISO 14003 certified factories
ï Conforms to European Community Directives 89/33/EEC, 73/23/EEC, 93/68/EEC
ï Certified to IEC 61215
Module power measurements calibrated to World Radiometric Reference through ESTI
(European Solar Test Installation at Ispra, Italy)
Framed modules listed by Underwriterís Laboratories for electrical and fire safety
(Class C fire rating)
Approved by Factory Mutual Research for application in NEC Class 1, Division 2, Groups
C & D hazardous locations
Your BP Solar representative:
Typical electrical characteristics SX 305M
Maximum power (Pmax) 4.5W
Warranted minimum power 4W
Voltage at Pmax (Vmp) 16.5V
Current at Pmax (Imp) 0.27A
Short circuit current (Isc) 0.3A
Open circuit voltage (Voc) 20.5V
Temperature coefficient of Isc (0.065±0.015)%/∫C
Temperature coefficient of Voc -(80±10)mV/∫C
Temperature coefficient of Pmax -(0.5±0.05)%/∫C
NOCT (Air 20∫C; sun 0.8kW/m2; wind speed 1m/s) 47±2∫C
Maximum series fuse rating 1A
Maximum system voltage 50V (IEC 61215 rating)
Mechanical characteristics SX 305M
Dimensions (mm) 269 x 251 x 23
(Overall tolerances +/-3mm)
Weight (kg) 0.8
Frame Clear anodised aluminium alloy type 6063T6.
Silver multimount frame.
Solar cells 36 cells (19mm x 57mm) configured geometrically for a 4 x 9
matrix connected in series.
Output cables RHW AWG# 18 (0.75mm2) 2 core PLTC cable. Lengths 457mm
(ì-ì black) and 457mm (ì+î red).
Diodes Two 9A, 45V Schottky by-pass diodes included.
Construction Front: High transmission 3mm tempered glass.
Rear: White polyester; encapsulant: EVA.
Standard test conditions - irradiance of 1000W/m2 at an AM1.5G solar spectrum and a temperature of 25∞C.
