BP SOLAR PANEL - 170 Watt BP4170J BP 4170 J
Quality BP High-efficiency photovoltaic module using silicon nitride multicrystalline silicon cells.
Quality from a manufacturer you trust. Great for Boats, Caravans, Camper Trailers, 4wd and more!
Comes with easy to use Junction Box for easy instalation. Freight cost is approximate and may be more or less - insurance is recommended. Paypal is not accepted for this item. For orders of 10+ units please contact us for a further discount!
Rated power: 170W
Typical applications: Designed for grid-connected applications, such as large commercial roofs, residential systems and photovoltaic (PV) power plants, as well as remote off-grid applications such as telecommunications, water pumping and residential systems.
Configuration: BP 3170N ñ Universal frame, a sealed junction box with output cables and polarised Multicontact (MC III) connectors.
BP 3170J ñ Universal frame with an accessible junction box for cable connection.
Nominal voltage: 24V
Cell technology: Multicrystalline
Dimensions: 1593 x 790 x 50mm
Weight: 15.4kg
Glass type: 3.2mm tempered anti-reflective coated glass.
Frame type: Silver anodised aluminium.
The BP 3170 is an advanced 170 watt module utilising anti-reflective
coatings on both its multicrystalline cells and glass. The module also features
IntegraBusTM technology which is a printed circuit board with integrated diodes
that has been designed to ensure reliability whilst conducting higher currents.
The BP 3170 has been designed for grid-connected solar applications, such
as large commercial roofs, residential systems and photovoltaic (PV) power
plants, as well as remote off-grid applications such as telecommunications,
water pumping and residential systems. This 72-cell module offers superior
value ñ greater performance from a white polyester back-sheet and innovative,
high-efficiency cells.
Performance BP 3170
Rated power 170W
Power tolerance -3/+5%
Nominal voltage 24V
Warranty* 90% of minimum warranted power output over 12 years
80% of minimum warranted power output over 25 years
Free from defects in materials and workmanship for 5 years
Configuration
BP 3170N Universal frame, a sealed junction box with output cables and
polarised Multicontact (MC III) connectors.
BP 3170J Universal frame with an accessible junction box for
cable connection.
Qualification test parameters
Temperature cycling range -40∫C to +85∫C for 200 cycles
Damp heat test 85∫C and 85% relative humidity
Front and rear static load test (eg: wind) 2400Pa (equivalent to 245kg/m2 load distributed)
Front load test (eg: snow) 5400Pa Ü (equivalent to 550kg/m2 load distributed)
Hailstone impact test 25mm hail at 23m/s from 1m distance
Impulse voltage test 8000V waveform impulse according to high
voltage test techniques IEC60060-1 standard
Reverse current overload test 135% of the overcurrent protection rating for two hours
Quality and safety
ï Certified according to the extended version of the IEC 61215:2005 (Crystalline silicon
terrestrial photovoltaic modules ñ design qualification and type approval).
ï Certified according to IEC 61730-1 and IEC 61730-2 (Photovoltaic module safety
qualification, requirements for construction and testing).
ï Listed by Underwriterís Laboratories for electrical and fire safety (Class C fire rating).
ï Approved by Factory Mutual Research in NEC Class 1, Division 2, Groups C and D
hazardous locations (BP ####J).
ï Module electrical measurements are calibrated to world radiometric reference via third
party international laboratories.
ï Manufactured in ISO 9001 and ISO 14001 certified factories. BP 3170
