BP SOLAR PANEL - 125 Watt BP3125J BP 3125 J
Quality BP High-efficiency photovoltaic module using silicon nitride multicrystalline silicon cells.
Quality from a manufacturer you trust. Great for Boats, Caravans, Camper Trailers, 4wd and more!
Comes with easy to use Junction Box for easy instalation. Freight cost is approximate and may be more or less - insurance is recommended. Paypal is not accepted for this item. For orders of 10+ units please contact us for a further discount!
BP 3125
The BP 3125 is revolutionary in its construction and features IntegraBusTM
technology. IntegraBusTM is a printed circuit board with integrated diodes that
is especially designed to ensure reliability whilst managing the high current
(over 7 amps) produced by our 156mm x 156mm cells. The silicon nitride
(SiN) coated multicrystalline cells used in this module are the largest solar
cells commercially available today. These new features give the BP 3125 the
highest rated power output of any 12V product. It is especially popular for
off-grid applications such as telecommunications, water pumping and remote
residential systems.
Performance BP 3125 BP 3115
Rated power 125W 115W
Power tolerance 5% 5%
Nominal voltage 12V 12V
Warranty 90% of minimum warranted power output over 12 years
80% of minimum warranted power output over 25 years
Free from defects in materials and workmanship for 5 years
Configuration
BP 3125N Universal frame, a sealed junction box with output cables
and polarised Multicontact (MC) connectors
BP 3125J Universal frame with an accessible junction box for
cable connection
Qualification test parameters
Temperature cycling range -40∞C to +85∞C
Damp heat test 85∞C and 85% relative humidity
Front and rear static load test (eg: wind) 2400 Pa
Front load test (eg: snow) 5400 Pa
Hailstone impact test 25mm hail at 23m/s
Quality and safety
ï Manufactured in ISO 9001 and ISO 14001 certified factories
ï Conforms to European Community Directive 89/33/EEC, 73/23/EEC, 93/68/EEC
ï Certified to IEC 61215
Module power measurements calibrated to World Radiometric Reference through ESTI
(European Solar Test Installation at Ispra, Italy)
Framed modules certified by T‹V Rheinland as Safety Class II (IEC 60364) equipment
for use in systems up to 1000 VDC
Framed modules listed by Underwriterís Laboratories for electrical and fire safety
(Class C fire rating)
Approval by Factory Mutual Research in NEC Class 1, Division 2, Groups C and D
hazardous locations (BP####J)
Your BP Solar Dealer:
Typical electrical characteristics BP 3125 BP 31153
Rated power (Pmax)1 125W 115W
Warranted minimum power 118.75W 109.2W
Voltage at Pmax (Vmp) 17.4V 17.1V
Current at Pmax (Imp) 7.2A 6.7A
Short circuit current (Isc) 8.1A 7.5A
Open circuit voltage (Voc) 22.0V 21.8V
Temperature coefficient of Isc
Temperature coefficient of Voc
Temperature coefficient of Pmax
NOCT2
Maximum series fuse rating 15A (BP 3125N) / 2 (BP 3125J)
Maximum system voltage 1000V (IEC 61215 rating)
1000V (T‹V Rheinland rating)
Mechanical characteristics BP 3125N / BP 3125J4
Dimensions 1510 x 674 x 50mm
(Overall tolerances +/-3mm)
Weight 12.0kg
Frame Clear anodised aluminium, alloy type 6063T6.
Colour: silver.
Solar cells 36 cells (156mm x 156mm) configured geometrically for a 9 x 4 matrix
connected in series.
Output cables (BP 3125N) RHW AWG# 12 (4mm≤) cable with polarized weatherproof DC rated
Multicontact (MC) connectors; asymmetrical lengths 900mm (-) and
800mm (+).
Junction box (BP 3125J) IP65 junction box with four terminal screw connection block, accepts
PG 13.5, M20, 13mm conduit, or cable fittings accepting 6-12mm
diameter cable.
Terminals accept 2.5 - 10mm≤ (8 to 14 AWG) wire.
Diodes IntegraBusTM technology includes Schottky by-pass diode integrated
into the printed circuit board.
Construction Front: high transmission 3mm tempered glass
Rear: white Polyester; encapsulant: EVA.
(0.065±0.015)%/∞C
-(80±10)mV/∞C
-(0.5±0.05)%/∞C
47±2∞C
