BP SOLAR PANEL - 80 Watt BP380J BP 380 J
Quality BP High-efficiency photovoltaic module using silicon nitride multicrystalline silicon cells.
Quality from a manufacturer you trust. Great for Boats, Caravans, Camper Trailers, 4wd and more!
Comes with easy to use Junction Box for easy instalation. Freight cost is approximate and may be more or less - insurance is recommended. Paypal is not accepted for this item.
BP 380
BP 380
Rated power: 80W
Typical applications: Suited to grid-connect applications such as residential systems or installations on commercial roofs, as well as traditional solar applications such as remote telecommunications and rural electrification.
Configuration: BP 380N - Universal frame, a sealed junction box with output cables and polarised multicontact connectors.
BP 380J - Universal frame with an accessible junction box for cable connection.
Nominal voltage: 12V
Cell technology: Multicrystalline
Dimensions: 1209 x 537 x 50mm
Weight: 7.7kg
Glass type: High transmission 3mm tempered glass.
Frame type: Clear anodised aluminium alloy type 6063T6. Colour: silver.he BP 380 is an advanced 80W photvoltaic module utilising multicrystalline
cells with anti-reflective silicon nitride (SiN) coating and features IntegraBusTM
technology. IntegraBusTM a printed circuit board with integrated diodes that
is especially designed to ensure reliability whilst conducting higher currents.
This solar module is as equally suited to grid connect applications (such as
residential systems or installations on commercial roofs) as traditional solar
applications, such as telecommunications and rural electrification. This 36-cell
module offers a superior value ñ greater performance from a white polyester
back-sheet and innovative, high-efficiency cells.
Performance BP 380 BP 375
Rated power 80W 75W
Power tolerance 5% 5%
Nominal voltage 12V 12V
Warranty 90% of minimum warranted power output over 12 years
80% of minimum warranted power output over 25 years
Free from defects in materials and workmanship for 5 years
Configuration
BP 380N Universal frame, a sealed junction box with output cables and
polarised Multicontact (MC) connectors
BP 380J Universal frame with an accessible junction box for cable
connection
Qualification test parameters
Temperature cycling range -40∞C to +85∞C
Damp heat test 85∞C and 85% relative humidity
Front and rear static load test (eg: wind) 2400 Pa
Front load test (eg: snow) 5400 Pa
Hailstone impact test 25mm hail at 23m/s
BP 380
Quality and safety
ï Manufactured in ISO 9001 and ISO 14001 certified factories
ï Conforms to European Community Directive 89/33/EEC, 73/23/EEC, 93/68/EEC
ï Certified to IEC 61215
Module power measurements calibrated to World Radiometric Reference through ESTI
(European Solar Test Installation at Ispra, Italy)
Framed modules certified by T‹V Rheinland as Safety Class II (IEC 60364) equipment
for use in systems up to 1000 VDC
Framed modules listed by Underwriterís Laboratories for electrical and fire safety
(Class C fire rating)
Approved by Factory Mutual Research in NEC Class 1, Division 2, Groups C and D
hazardous locations (BP ####J)
Your BP Solar Dealer:
L
td
2
0
0
7
Typical electrical characteristics BP 380 BP 375≥
Rated Power (Pmax)π 80W 75W
Warranted minimum power 76W 71W
Voltage at Pmax (Vmp) 17.6V 17.3V
Current at Pmax (Imp) 4.55A 4.35A
Short circuit current (Isc) 4.8A 4.75A
Open circuit voltage (Voc) 22.1V 21.8V
Temperature coefficient of Isc (0.065±0.015)%/∞C
Temperature coefficient of Voc -(80±10)mV/∞C
Temperature coefficient of Pmax -(0.5±0.05)%/∞C
NOCT≤ 47±2∞C
Maximum series fuse rating 15A (BP 380N) / 20A (BP 380J)
Maximum system voltage 1000V (IEC 61215 rating)
1000V (T‹V Rheinland rating)
Mechanical characteristics BP 380N / BP 380J4
Dimensions 1209 x 537 x 50mm
Weight 7.7kg
Frame Clear anodised aluminium alloy type 6063T6. Colour: silver.
Solar cells 36 cells (125mm x 125mm) configured geometrically for a 9 x 4
matrix connected in series.
Output cables (BP 380N) RHW AWG# 12 (4mm≤) cable with polarised weatherproof DC
rated Multicontact (MC) connectors; asymmetrical lengths 900 (-)
and 800mm (+).
Junction box (BP 380J) IP65 junction box with four terminal screw connection block, accepts
PG 13.5, M20, 13mm conduit, or cable fittings accepting 6 ñ12mm
diameter cable. Terminals accept 2.5 ñ 10mm≤ (8 to 14 AWG) wire.
Diodes IntegraBusTM technology includes Schottky bypass diodes
integrated into the printed circuit board bus.
Construction Front: high transmission 3mm tempered glass
Rear: white polyester; encapsulant: EVA.
(Overall tolerances +/-3mm)
